Spirometers are a medical device used to measure respiration flow rates in the lungs. They record the amount of air breathed in and out over a specific period of time and are used to test the condition of a patient's lungs. Diseases such as emphysema, bronchitis, and asthma can be tested for with this device. It is often used to find out the cause of shortness of breathe, to assess lung function due to contaminants, the effects of medications, and the progression of disease.
The test involves some fast and forced periods of breathing and can cause a temporary shortness of breath or a feeling of lightheadedness. The patient wears nose clips and breathes through a tight fitting mouthpiece. Normal results are based on height, ethnicity, sex, and age. A value less than 80 percent is considered abnormal. Ranges can vary slightly among laboratories.
When the result is abnormal it can be an indication of a chest or lung disease such as chronic bronchitis, emphysema, asthma, or an infection. In these cases the lungs hold too much air and can take a longer time to empty. These conditions are known as obstructive lung disorders and can sometimes cause scarring and produce a smaller lung capacity so that the lungs don't hold enough air and do not transfer oxygen into the blood effectively. Some illness that are contributors to these diseases are fibrosis of the lungs, being extremely overweight, lung cancer, and scleroderma and sarcoidosis.
For most, this test poses very little risk, but there are conditions that could cause the risk of a collapsed lung such as those who have certain lung diseases. People who have heart disease or have recently experienced a heart attack should avoid this test.
Being cooperative during testing is very important to receive the most accurate results. The seal around the mouthpiece must be tight or the device will product results that are hard to understand. Smoking or eating a heavy meal should be avoided for 4 to 6 hours before testing. People using bronchodilators or inhaler medications will receive special instruction.
Nitrogen or helium gases are also used to measure lung volume. The gas is breathed through a tube for a specific amount of time. Tracer gas is used in diffusion measurements and requires that one breathe of this harmless gas is taken for a specified amount of time and then measured as the patient exhales. The difference in the amount breathed in versus breathed out is measured to check for the movement of oxygen flowing into the bloodstream.
This test is a routine part of a physical and can alert the physician to possible problems with lung function for early detection and treatment. It is non-invasion and of minimal discomfort to the patient while being performed. It takes but a few minutes to get an accurate assessment of how the lungs are functioning.
With the invention of spirometers as far back as 129 A. D. By a physician in Greece using an animal bladder to our current version invented in 1974, this medical device has proven to be an accurate measurement of lung volume to assist in the detection and monitoring of diseases and the effect of medications.
The test involves some fast and forced periods of breathing and can cause a temporary shortness of breath or a feeling of lightheadedness. The patient wears nose clips and breathes through a tight fitting mouthpiece. Normal results are based on height, ethnicity, sex, and age. A value less than 80 percent is considered abnormal. Ranges can vary slightly among laboratories.
When the result is abnormal it can be an indication of a chest or lung disease such as chronic bronchitis, emphysema, asthma, or an infection. In these cases the lungs hold too much air and can take a longer time to empty. These conditions are known as obstructive lung disorders and can sometimes cause scarring and produce a smaller lung capacity so that the lungs don't hold enough air and do not transfer oxygen into the blood effectively. Some illness that are contributors to these diseases are fibrosis of the lungs, being extremely overweight, lung cancer, and scleroderma and sarcoidosis.
For most, this test poses very little risk, but there are conditions that could cause the risk of a collapsed lung such as those who have certain lung diseases. People who have heart disease or have recently experienced a heart attack should avoid this test.
Being cooperative during testing is very important to receive the most accurate results. The seal around the mouthpiece must be tight or the device will product results that are hard to understand. Smoking or eating a heavy meal should be avoided for 4 to 6 hours before testing. People using bronchodilators or inhaler medications will receive special instruction.
Nitrogen or helium gases are also used to measure lung volume. The gas is breathed through a tube for a specific amount of time. Tracer gas is used in diffusion measurements and requires that one breathe of this harmless gas is taken for a specified amount of time and then measured as the patient exhales. The difference in the amount breathed in versus breathed out is measured to check for the movement of oxygen flowing into the bloodstream.
This test is a routine part of a physical and can alert the physician to possible problems with lung function for early detection and treatment. It is non-invasion and of minimal discomfort to the patient while being performed. It takes but a few minutes to get an accurate assessment of how the lungs are functioning.
With the invention of spirometers as far back as 129 A. D. By a physician in Greece using an animal bladder to our current version invented in 1974, this medical device has proven to be an accurate measurement of lung volume to assist in the detection and monitoring of diseases and the effect of medications.
About the Author:
Check out our extensive selection of quality spirometers by viewing our official site at www.henanmedical.com now. For ordering instructions and pricing information, take a look at http://www.henanmedical.com .
Posts
Spirometers - Why They Are Used